Bu bölümde ara
63 kayıt
What Is the Difference Between Inconel 601 and Inconel 600?
Inconel 600 is a corrosion alloy and Inconel 601 a heat-resisting one; chromium and aluminium make the ...
What Is the Difference Between Custom 455 and 17-4PH?
The difference between these two precipitation-hardening stainless steels is chromium: Custom 455 gives up chromium for higher ...
What Is the Difference Between AISI F55 and AISI F53?
These two super duplexes share a chromium-nickel band; F55 contains copper and tungsten, while F53 offers higher ...
What Is the Difference Between AISI F255 and AISI F55?
The difference between these two super duplexes is copper and tungsten: F255 carries copper for acid service, ...
What Is the Difference Between AISI 8740 and AISI 4340?
Two low-alloy quench-and-temper steels with the same carbon; 4340's much higher nickel and chromium give it markedly ...
What Is the Difference Between AISI 434 and AISI 430?
AISI 434 has the same chromium as 430; its difference is molybdenum, and that difference is decisive ...
What Is the Difference Between AISI 431 and AISI 410?
With higher chromium and added nickel, AISI 431 is the most corrosion-resistant of the hardenable stainless steels; ...
What Is the Difference Between AISI 430F and AISI 430?
AISI 430F is 430 with sulphur and molybdenum added: far easier to machine, but it cannot be ...
What Is the Difference Between AISI 420B and AISI 420C?
420B and 420C are carbon steps within the same 13 % chromium martensitic family; 420C reaches higher ...
What Is the Difference Between AISI 416 and AISI 410?
AISI 416 is the free-machining version of 410: the easiest stainless steel to machine, but behind 410 ...
What Is the Difference Between AISI 415 and AISI 410?
AISI 415 is a low-carbon nickel-molybdenum martensitic: tougher, stronger and far more weldable than AISI 410 ...
What Is the Difference Between AISI 405 and AISI 410?
AISI 405 contains aluminium and therefore cannot be hardened by quenching; AISI 410 hardens but requires post-weld ...
What Is the Difference Between AISI 329 and AISI 318?
AISI 329 is a first-generation duplex and AISI 318 a modern nitrogen-alloyed one; the difference is molybdenum, ...
What Is the Difference Between AISI 310 and AISI 314?
AISI 314 has the same chromium and nickel as 310S; its difference is silicon, and that difference ...
What Is the Difference Between AISI 303 and AISI 304?
AISI 303 is AISI 304 with sulphur added: it machines far faster, but gives up weldability and ...
What Is the Difference Between AISI 316L and Inconel 625?
Inconel 625 is nickel-based and delivers corrosion and temperature resistance far beyond that of 316L ...
What Is the Difference Between AISI 316L and Ti Grade 2?
In chloride environments Ti Grade 2 is well ahead of 316L; 316L is economical and easy to ...
What Is the Difference Between Ti Grade 5 and AISI 4340?
Ti Grade 5 is half the density and corrosion resistant; AISI 4340 is stronger and far more ...
What Is the Difference Between Nitronic 50 and AISI 316L?
Nitronic 50 is an austenitic stainless strengthened with nitrogen and manganese; it gives more than twice the ...
What Is the Difference Between 17-7PH and 17-4PH?
17-7PH is semi-austenitic and used for spring applications, 17-4PH martensitic and used for general high strength ...
What Is the Difference Between Maraging 300 and Maraging 350?
With raised cobalt and titanium, Maraging 350 moves into a strength class above Maraging 300 ...
What Is the Difference Between Haynes 25 (L-605) and Inconel 625?
Haynes 25 is cobalt based and works at higher temperature; Inconel 625 is nickel based with broader ...
What Is the Difference Between Nimonic 80A and Waspaloy?
With its cobalt and molybdenum additions Waspaloy works at higher temperature and higher strength than Nimonic 80A ...
What Is the Difference Between Incoloy A286 and Inconel 718?
A286 is iron based and more economical; Inconel 718 is nickel based and works at higher temperatures ...
What Is the Difference Between Hastelloy X and Inconel 625?
Hastelloy X is optimised for oxidation and creep at high temperature, Inconel 625 for corrosion and strength ...
What Is the Difference Between Incoloy 825 and Incoloy 925?
Incoloy 925 is an Incoloy 825 derivative made age-hardenable through aluminium and a higher titanium content ...
What Is the Difference Between Incoloy 800H and Incoloy 825?
Incoloy 800H is designed for high-temperature strength, Incoloy 825 for acid corrosion resistance ...
What Is the Difference Between Hastelloy B-3 and Hastelloy C-276?
Hastelloy B-3 contains no chromium and was developed for reducing acids; C-276 contains both chromium and molybdenum ...
What Is the Difference Between Hastelloy C-22 and Hastelloy C-2000?
C-2000 was developed with a copper addition to resist both oxidising and reducing acids ...
What Is the Difference Between EN AW 7075 and EN AW 6082?
EN AW 7075 is among the strongest aluminium grades but cannot be welded; 6082 is the weldable ...
What Is the Difference Between EN AW 5083 and EN AW 5754?
EN AW 5083 is the marine standard with higher magnesium and manganese; 5754 is softer and easier ...
What Is the Difference Between EN AW 7075 and EN AW 2017A?
EN AW 7075 is zinc-based and stronger; 2017A is copper-based and easier to machine ...
What Is the Difference Between EN AW 6082 and EN AW 6060?
EN AW 6082 is used for structural strength, 6060 for thin profiles and surface quality ...
What Is the Difference Between Ti Grade 4 and Ti Grade 5?
Ti Grade 4 is the strongest pure titanium grade; Grade 5 is alloyed and can be hardened ...
What Is the Difference Between Ti Grade 1 and Ti Grade 2?
Ti Grade 1 is the softest pure titanium grade; Grade 2 is stronger thanks to its slightly ...
What Is the Difference Between Ti Grade 5 and Ti Grade 5 ELI?
ELI is the Ti6Al4V version with reduced oxygen and iron limits; its toughness and cryogenic performance are ...
What Is the Difference Between Ti Grade 2 and Ti Grade 5?
Ti Grade 2 is pure titanium; Grade 5 delivers three times the strength through aluminium and vanadium ...
What Is the Difference Between Invar 36 and Kovar?
Invar 36 gives the lowest possible thermal expansion; Kovar is designed to match the expansion of borosilicate ...
What Is the Difference Between Nickel 200 and Nickel 201?
The only difference between Nickel 200 and 201 is the carbon content; 201 was developed for service ...
What Is the Difference Between Monel 400 and Monel K-500?
Monel K-500 is a Monel 400 derivative made age-hardenable by adding aluminium and titanium ...
What Is the Difference Between Hastelloy C-276 and Hastelloy C-22?
C-276 is molybdenum-weighted and C-22 chromium-weighted; one excels in reducing, the other in oxidising environments ...
What Is the Difference Between Inconel 718 and Inconel X-750?
Inconel X-750 hardens through a titanium-based gamma prime phase and is used for springs; 718 hardens with ...
What Is the Difference Between Inconel 718 and Waspaloy?
Inconel 718 hardens with niobium, Waspaloy with titanium and aluminium; Waspaloy stays stable at higher temperatures ...
What Is the Difference Between Inconel 625 and Inconel 718?
Inconel 625 hardens by solid solution, Inconel 718 by ageing; 718 delivers far higher strength ...
What Is the Difference Between Inconel 600 and Inconel 625?
Inconel 600 is a nickel–chromium alloy, Inconel 625 one strengthened with molybdenum and niobium ...
What Is the Difference Between Duplex AISI 318 and Super Duplex AISI F53?
Super duplex F53 contains more chromium, molybdenum and nitrogen than duplex 318; it was developed for seawater ...
What Is the Difference Between AISI 316L and Duplex AISI 318?
Duplex AISI 318 is a mixture of austenite and ferrite phases; it gives more than twice the ...
What Is the Difference Between AISI 430 and AISI 304?
AISI 430 is ferritic and magnetic, AISI 304 austenitic; the element that makes the difference is nickel ...
What Is the Difference Between AISI 316L and AISI 904L?
904L contains far more nickel and molybdenum than 316L and was developed for sulphuric and phosphoric acid ...
What Is the Difference Between 17-4PH and 13-8PH?
17-4PH hardens with copper, 13-8PH with aluminium; 13-8PH gives a cleaner structure and higher toughness ...
What Is the Difference Between 17-4PH and 15-5PH?
15-5PH is the reduced-delta-ferrite version of 17-4PH; its transverse toughness is higher ...
What Is the Difference Between AISI 420 and AISI 440C?
AISI 440C contains far more carbon than 420 and reaches 58–62 HRC; 420 stays tougher and is ...
What Is the Difference Between AISI 410 and AISI 420?
The difference between AISI 410 and AISI 420 is the carbon content; 420 reaches higher hardness, 410 ...
What Is the Difference Between AISI 321 and AISI 316Ti?
AISI 321 and AISI 316Ti are both titanium-stabilised; the difference between them is the molybdenum content ...
What Is the Difference Between AISI 304 and AISI 304L?
The only difference between AISI 304 and 304L is the carbon content; 304L is preferred for welded ...
What Is the Difference Between AISI 316 and AISI 316L?
The only difference between AISI 316 and 316L is the carbon content; in welded parts that difference ...
What Is the Difference Between AISI 304 and AISI 316?
The key difference between AISI 304 and AISI 316 is molybdenum; in chloride-bearing environments that difference is ...
What Is the Difference Between AISI 4140 and H11?
AISI 4140 is a quenched and tempered steel, H11 a 5% chromium hot work tool steel. The ...
What Is the Difference Between Maraging 250 and Maraging 300?
The difference between Maraging 250 and Maraging 300 lies in cobalt and titanium; both are carbon-free, nickel-based ...
What Is the Difference Between 300M and AerMet 100?
300M and AerMet 100 are in a similar strength class; the difference emerges in toughness and reduction ...
What Is the Difference Between AISI 4340 and 300M?
300M is essentially an AISI 4340 derivative with raised silicon and vanadium. The strength difference and landing ...
What Is the Difference Between AISI 8620 and AISI 9310?
The difference between AISI 8620 and AISI 9310 lies in the nickel content and in the core ...
What Is the Difference Between AISI 4140 and AISI 4340?
The key difference between AISI 4140 and AISI 4340 is nickel. Chemical composition, mechanical values, AMS/UNS equivalents ...